REM Logo

Recycling Equipment Manufacturing - Lifts tippers dumpers


Hydraulic Lifts, Tippers & Dumpers

HDL Series

Lift and dump materials from carts, bins, gaylords, or other containers, with this unique and versatile container lift from REM®. This unit is designed for side loading of materials onto REM®'s SC Sorting Conveyors, or as a feed for a conveyor, shredder, crusher, or other processing equipment. Simply load containers onto the lift and use the convenient foot switch to elevate to an approximate 35-degree tipping angle (45 degree angle available as an option). REM®'s HDL-2 increases worker productivity, reduces back-strain and lowers contaminant levels from its very first day of operation.

DURABLE CONSTRUCTION
Built for your most demanding applications, this rugged unit is capable of lifting containers weighing as much as 2,000 lbs. The HDL can be built to accommodate containers up to 60" wide, with discharge heights up to 60" tall. REM®'s unique heavy duty I-Beam structural frame design is built to reinforce the cylinder support blocks and help center the load. An adjustable retaining rod holds the container in place as it tips.

For even more lifting power, check out our Heavy-duty HDL, below.

HDL Brochure

Heavy-duty HDL

Dump materials from carts, bins, Gaylord boxes or your custom containers with this versatile, extreme duty container lift from REM®. This unit is designed for side loading of materials onto REM’s® Model SC sorting conveyors, or as a feed for a conveyor, shredder, crusher, or other processing equipment. Simply load containers onto the lift and use the convenient foot switch to elevate to a tipping angle of approximately 45 degrees. REM’s® model HDL-5 increases worker productivity, reduces back-strain and lowers contaminant levels from its very first day of operation.

HEAVY DUTY DURABLE CONSTRUCTION
Built for your most demanding applications, this rugged unit is capable of lifting containers weighing as much as 5,000 lbs. REM’s® unique heavy duty 10” I-Beam frame construction and oversize rotator shaft along with it’s heavy duty bearings are built for maximum structural integrity. Special retaining rods, clamps or custom designed holding fixtures will keep your containers secure in the bucket while still allowing the material to discharge. Containers up to 120” wide can be loaded onto this heavy duty lift. Discharge heights of up to 72” tall and custom bucket depth are also available.

Heavy duty HDL Brochure

HDL-Tote Tipper

Lift and dump materials from standard 60 to 95 gallon tote containers with this unique and versatile container lift from REM®. This unit is designed for side loading of materials onto REM’s® Model SC Sorting Conveyors, or as a feed for a compactor, shredder, crusher, or other processing equipment. Simply load containers onto the lift and use the convenient foot switch to elevate to an approximate 40 degree tipping angle. REM’s® model HDL-2 Hydraulic Tote lift increases worker productivity, reduces back-strain and lowers contaminant levels from its very first day of operation.

DURABLE CONSTRUCTION
Built for your most demanding applications, this rugged unit is capable of lifting containers weighing as much as 750 lbs. Containers up to 29" wide can be loaded on the lift. Discharge heights up to 60" tall are standard with the availabilty of custom designs. REM®'s unique C-channel and "tube leg" design is built to reinforce the cylinder support blocks and help center the load. An adjustable clamp holds the container in place as it tips.

HDL-Tote Brochure

HDL-Tilt

REM’s “Portable Tilter” was designed as a floor level easily loaded box tilter. This unit is designed for smooth tilting of your container to allow the worker to easily remove products from the bottom of a Gaylord or similar container. Simply load containers onto the lift and use the convenient push button switch to elevate to an approximate 60 degree angle. REM’s® model HDL-2 Hydraulic box tilter increases worker productivity, reduces back-strain and lowers worker fatigue from the very first day.

DURABLE CONSTRUCTION
Built for your most demanding applications, this rugged unit is capable of lifting containers weighing as much as 750 lbs. Containers up to 50” wide can be loaded into the ground level bucket by pallet jack or forklift. The hand operated controls are an improvement over foot pedal controls that are often damaged by forklifts. Being able to plug into a standard 120 volt outlet makes this tilter very functional. Portability makes it a valuable addition to the equipment in your plant.

Tilt-tipper Brochure

High Discharge Lift

This rugged piece of equipment was designed using the most advanced 3D solid modeling software on the market today.

With advanced engineering software at their disposal, our design team was able to produce a quality precision piece of equipment that works as was intended. Our number one priority was to create a rugged quality product that was safe and reliable. By providing the REM Model Hi-Lift HDL with safety interlocked access doors as a standard requirement on all our Hi-Lift dumpers, we set the standard for industry safety.
Each unit is built to customer specifications to meet the exact needs for each application.

Hi-lift Brochure

©2017 Recycling Equipment Manufacturing, Inc. 373 Shannon Lane
Priest River, ID 83856
Phone: (208) 448-4736 | 800-745-4736
Fax: (208) 448-1786

Site Design By Ohpyx